Outils pour utilisateurs

Outils du site


nanopi-duo:start

Différences

Ci-dessous, les différences entre deux révisions de la page.


nanopi-duo:start [2024/02/09 17:10] (Version actuelle) – créée - modification externe 127.0.0.1
Ligne 1: Ligne 1:
 +====== NanoPI DUO ======
 +{{:nanopi-duo:nanopi-duo-layout.jpg?200|}}
 +
 +{{:nanopi-duo:duo_pinout-02.jpg?200|}}
 +
 +  * http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=197
 +  * http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo
 +
 +image systeme de base : https://www.mediafire.com/folder/2nswfc4j82d9r/
 +
 +armbian prend en compte cette carte :-))
 +
 +===== GPIO =====
 +après l'installation : 
 +  git clone https://github.com/friendlyarm/WiringNP
 +  
 +  gpio readall
 +  +-----+-----+----------+------+---+-NanoPi-Duo--+------+----------+-----+-----+
 +  | BCM | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | BCM |
 +  +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 +  |            MIC_N |      |    1 || 2  |        | EPhySPD  |         |
 +  |            MIC_P |      |    3 || 4  |        | EPhyLinK |         |
 +  |         | LineOutR |      |    5 || 6  |        | EPhyTXP  |         |
 +  |         | LineOutL |      |    7 || 8  |        | EPhyTXN  |         |
 +  |             CVBS |      |    9 || 10 |        | EPhyRXP  |         |
 +  | 198 |   8 |   GPIOG6 | ALT5 | 0 | 11 || 12 |        | EPhyRXN  |         |
 +  | 199 |   9 |   GPIOG7 | ALT5 | 0 | 13 || 14 |        | USB-DP2  |         |
 +  |  15 |   7 |  GPIOA15 | ALT5 | 0 | 15 || 16 |        | USB-DM2  |         |
 +  |  16 |   0 |  GPIOA16 | ALT5 | 0 | 17 || 18 |        | USB-DP3  |         |
 +  |  14 |   2 |  GPIOA14 | ALT5 | 0 | 19 || 20 |        | USB-DM3  |         |
 +  |  13 |   3 |  GPIOA13 | ALT5 | 0 | 21 || 22 | 1 | OUT  | GPIOG11  | 16  | 203 |
 +  |  12 |  12 |  GPIOA12 | ALT5 | 0 | 23 || 24 |        | IR-RX    |         |
 +  |  11 |  13 |  GPIOA11 | ALT5 | 0 | 25 || 26 |        | 0v               |
 +  |               0v |      |   | 27 || 28 |        | 3.3v             |
 +  |   4 |  14 |   GPIOA4 | ALT5 | 0 | 29 || 30 |        | 5v               |
 +  |   5 |  15 |   GPIOA5 | ALT5 | 0 | 31 || 32 |        | 5v               |
 +  +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 +  | BCM | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | BCM |
 +  +-----+-----+----------+------+---+-NanoPi-Duo--+------+----------+-----+-----+
 +  
 +Ne pas passer par armbian-config pour charger au boot les parties i2c, uart etc ( pas pwm sinon plus de moniteur)
 +
 +Juste modifier le fichier /boot/armbianEnv.txt avec
 +    overlays=analog-codec i2c0 pps-gpio spi-spidev uart1 uart2 usbhost2 usbhost3
 +
 +connecter la carte automatiquement sur le wifi
 +
 +  nmcli dev wifi list
 +
 +  /etc/rc.local : nmcli dev wifi connect "SNHACK" password 123...
 +
 +autre methode:
 +<code>
 +nmcli c add type wifi con-name mywifi ifname wlan0 ssid your_wifi_ssid
 +nmcli con modify mywifi wifi-sec.key-mgmt wpa-psk
 +nmcli con modify mywifi wifi-sec.psk your_wifi_password
 +nmcli con up mywifi
 +</code>
 +===== audio =====
 +si  install http://snhack.org/doku.php?id=projets:chaine fait
 +  apt install jackd1   jack-tools meterbridge qjackctl