Différences

Ci-dessous, les différences entre deux révisions de la page.

@@ Ligne 1: / Ligne 1: @@
+====== Micropython sur ESP8266 ======
+suivre https://github.com/micropython/micropython/tree/master/esp8266 pour fabriquer le firmware...
+pistes:
+  * http://forum.micropython.org/viewtopic.php?t=1655
+  * http://www.electrodragon.com/w/MicroPython_ESP8266
+  * https://learn.adafruit.com/building-and-running-micropython-on-the-esp8266/micropython-usage
+et
+  * de http://docs.micropython.org/en/latest/esp8266/esp8266/quickref.html
+<code>
+import network
+wlan = network.WLAN(network.STA_IF) # create station interface
+wlan.active(True)       # activate the interface
+wlan.scan()             # scan for access points
+wlan.isconnected()      # check if the station is connected to an AP
+wlan.connect('essid', 'password') # connect to an AP
+wlan.mac()              # get the interface's MAC adddress
+wlan.ifconfig()         # get the interface's IP/netmask/gw/DNS addresses
+ap = network.WLAN(network.AP_IF) # create access-point interface
+ap.active(True)         # activate the interface
+ap.config(essid='ESP-AP') # set the ESSID of the access point
+</code>
+<code>
+def do_connect():
+    import network
+    wlan = network.WLAN(network.STA_IF)
+    wlan.active(True)
+    if not wlan.isconnected():
+        print('connecting to network...')
+        wlan.connect('essid', 'password')
+        while not wlan.isconnected():
+            pass
+    print('network config:', wlan.ifconfig())
+</code>